Face Material

White semi-gloss wood-free machine-coated paper.

Basis weight, ISO 536: Caliper, ISO 534:

80 g/m2 69 mkm

Adhesive

Permanent rubber-based hot-melt pressure-sensitive adhesive. Clear, UV resistant. Ensures instant tack. Is recommended in particular for using in cool conditions, on damp surfaces (for instance, surfaces with condensate). Once applied provides superior operational indicators in low temperatures.

Initial tack, FTM 9 (glass):	17 N/25 mm
Final adhesion, FTM 2 (90):	11 N/25 mm
Minimal application temperature:	0 °C
Operating temperature:	-40...+70 °C

Liner

Yellow Glassine
Basis weight, ISO536:	58 g/m2
Caliper, ISO534:	51 mkm

Ready Laminate

Overall caliper, ISO 534:

140 mkm +/- 10%

Use

Can be used for labeling food products, household detergents, etc., including on cooled and frozen surfaces.

Processing and Printing

The material can be used in the following kinds of printing: flexographic, letterpress, offset, gravure, and screen. It is recommended for UV, water and solvent-based inks.

Shelf Life: 12 months

The product should be stored in a cool dry place, at a temperature of 20°С to 25°С and relative humidity of 40%-50% (regulated by FINAT standard). The materials should not be stored near heating sources. Avoid exposure to direct sunlight. Allow at least 24 hours for acclimatization in print shop conditions. It is recommended to hermetically pack ready products and remainder of materials in polyethylene film to ensure protection against moisture during storage and transportation.

back