Face Material

White semi-gloss wood-free machine-coated paper

Basis weight, ISO 536: Caliper, ISO 534:

80 g/m2 69 mkm

Adhesive

Water-based permanent acrylic pressure-sensitive adhesive. Clear, UV resistant. Provides high initial tack and superior Peel adhesion 90°. Once applied becomes highly resistant to high temperatures and sunlight. Ensures high adhesion even for non-polar surfaces.

Initial tack, FTM 9 (glass):	15 N/25 mm
Final adhesion, FTM 2 (90):	8 N/25 mm
Minimal application temperature:	+5 °C
Operating temperature:	-20...+80 °C

Liner

Yellow Glassine
Basis weight, ISO536:	58 g/m2
Caliper, ISO534:	51 mkm

Ready Laminate

Overall caliper, ISO 534:

140 мkм +/- 10%

Use

Used for labeling food products, household detergents, etc., including cool surfaces.

Processing and Printing

The material can be used in the following kinds of printing: flexographic, letterpress, offset, gravure, and screen. It is recommended for UV, water and solvent-based inks.

Shelf Life: 12 months

The product should be stored in a cool dry place, at a temperature of 20°С to 25°С and relative humidity of 40%-50% (regulated by FINAT standard). The materials should not be stored near heating sources. Avoid exposure to direct sunlight. Allow at least 24 hours for acclimatization in print shop conditions. It is recommended to hermetically pack ready products and remainder of materials in polyethylene film to ensure protection against moisture during storage and transportation.

back